================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了时钟输出功能，可输出以HSI为源的PLL波形。

Function descriptions:
This sample demonstrates the clock output function, which can output PLL 
waveform with HSI as the source.
================================================================================
测试环境：
测试用板：PY32M031_STK
MDK版本： 5.28
IAR版本： 9.20
GCC 版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32M031_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行；
2. 可由示波器观察到PA08输出PLL波形（48MHz）。

Example execution steps:
1.Compile and download the program to the MCU and run it;
2. observe the PLL waveform (48MHz) output on PA08 using 
an oscilloscope.
================================================================================
注意事项：

Notes:
================================================================================